Acss Aluminum Conductor Steel Supported

Acss Aluminum Conductor Steel Supported

Quick Details

Acss Aluminum Conductor Steel Supported

ACSS

Hntddl

ISO9001

Overhead

Round Wire

Aluminum & Steel

Overhead

Stranded

Bare

HNTDDL

by Sea&Wooden Drums

ASTM B 856

China

Product Details

APPLICATION:
ACSS is used for overhead distribution and transmission lines.
It is designed to operate continuously at elevated temperatures up to 250°C without loss of strength. It sags less than a comparable ACSR und
er electrical loading; it is self-damping if pre-stretched during installation; and its final sags are not affected by long term creep of aluminum.

The advantages make ACSS especially useful in reconductoring applications requiring increased current with existing tensions and clearances,
new line applications where structures can be economized because of reduced conductor sag.

CONSTRUCTION:
ACSS is a composite concentric-lay stranded conductor. Steel strands form the central core of the conductor with two or more layers of alum
inum 1350-O wire stranded around it. The steel core carries most or all of the mechanical load of the conductor due to the "O" temper (fully
annealed or soft) aluminum.

ACSS (Aluminum Conductor Steel Supported) is very similar to ACSR (Aluminum Conductor Steel Reinforced).  But, as their names imply,
ACSS depends primarily on the steel core for support, whereas the ACSR is supported by both the aluminum and steel components.
Product Description:

ACSS                      ASTM B 856 
Code name Area Stranding and wire diameter Approx. overall diameter Unit weight GA(X) OR MA(X) Nom. DC resistance at 20 deg.
Nominal  Alum. Steel Total Alum. Steel   Alum. Steel Total
  AWG or MCM mm2 mm2 mm2 mm mm mm kg/km kg/km kg/km Ohm/km
PARTRIDGE 266.8  135.19  22.02  157.21  26/2.57 7/2.00 16.30  375  172  547  0.2063 
JUNCO 266.8  135.19  31.54  166.72  30/2.40 7/2.40 16.77  375  246  622  0.2050 
OSTRICH 300.0  151.96  24.73  176.69  26/2.73 7/2.12 17.27  421  193  614  0.1837 
LINNET 336.4  170.31  27.78  198.10  26/2.89 7/2.25 18.30  472  217  689  0.1637 
ORIOLE 336.4  170.48  39.78  210.26  30/2.69 7/2.69 18.83  473  311  784  0.1627 
BRANT 397.5  201.43  26.11  227.54  24/3.27 7/2.18 19.61  558  204  762  0.1390 
IBIS 397.5  201.27  32.83  234.09  26/3.14 7/2.44 19.89  558  256  814  0.1387 
LARK 397.5  201.39  46.99  248.38  30/2.92 7/2.92 20.46  559  367  926  0.1377 
FLICKER 477.0  241.77  31.34  273.11  24/3.58 7/2.39 21.49  670  245  915  0.1160 
HAWK 477.0  241.52  39.32  280.85  26/3.44 7/2.67 21.78  669  307  976  0.1153 
HEN 477.0  241.71  56.40  298.11  30/3.20 7/3.20 22.42  671  441  1112  0.1147 
PARAKEET 556.5  282.07  36.54  318.62  24/3.87 7/2.58 23.21  782  285  1067  0.0993 
DOVE 556.5  281.98  45.93  327.92  26/3.72 7/2.89 23.54  781  359  1140  0.0990 
EAGLE 556.5  281.99  65.80  347.79  30/3.46 7/3.46 24.22  783  514  1297  0.0983 
PEACOCK 605.0  306.66  39.70  346.37  24/4.03 7/2.69 24.20  850  310  1160  0.0913 
SQUAB 605.0  306.38  49.89  356.28  26/3.87 7/3.01 24.53  849  390  1239  0.0910 
WOOD DUCK 605.0  306.51  71.52  378.04  30/3.61 7/3.61 25.25  851  559  1410  0.0903 
TEAL 605.0  306.51  69.89  376.40  30/3.61 19/2.16 25.25  851  547  1398  0.0907 
ROOK 636.0  322.31  41.76  364.07  24/4.14 7/2.76 24.81  893  326  1219  0.0870 
GROSBEAK 636.0  322.25  52.45  374.71  26/3.97 7/3.09 25.16  893  410  1303  0.0867 
SCOTER 636.0  322.25  75.19  397.45  30/3.70 7/3.70 25.89  895  587  1482  0.0860 
EGRET 636.0  322.25  73.54  395.80  30/3.70 19/2.22 25.89  895  576  1471  0.0860 
FLAMINGO 666.6  337.94  43.78  381.72  24/4.23 7/2.82 25.40  936  342  1278  0.0830 
GANNET 666.6  337.68  54.98  392.67  26/4.07 7/3.16 25.75  936  429  1365  0.0827 
STILT 715.5  362.70  46.99  409.70  24/4.39 7/2.92 26.32  1005  367  1372  0.0773 
STARLING 715.5  362.59  59.02  421.62  26/4.21 7/3.28 26.69  1005  461  1466  0.0770 
REDWING 715.5  362.38  82.73  445.12  30/3.92 19/2.35 27.46  1006  648  1654  0.0767 
CUCKOO 795.0  402.82  52.19  455.01  24/4.62 7/3.08 27.73  1116  408  1524  0.0697 
DRAKE 795.0  403.00  65.60  468.61  26/4.44 7/3.45 28.13  1117  512  1629  0.0697 
MACAW 795.0  402.94  20.70  423.65  42/3.50 7/1.94 26.82  1116  162  1278  0.0703 
TERN 795.0  402.73  27.84  430.58  45/3.38 7/2.25 27.01  1116  217  1333  0.0700 
CONDOR 795.0  402.59  52.19  454.79  54/3.08 7/3.08 27.73  1115  408  1523  0.0697 
MALLARD 795.0  402.89  91.90  494.79  30/4.14 19/2.48 28.95  1119  719  1838  0.0690 
RUDDY 900.0  455.90  31.54  487.44  45/3.59 7/2.40 28.74  1263  246  1509  0.0620 
CANARY 900.0  456.04  59.12  515.16  54/3.28 7/3.28 29.51  1263  462  1725  0.0613 
REDBIRD 954.0  483.52  62.65  546.17  24/5.06 7/3.38 30.39  1340  489  1829  0.0580 
RAIL 954.0  483.38  33.44  516.83  45/3.70 7/2.47 29.59  1339  261  1600  0.0583 
TOWHEE 954.0  483.54  42.68  526.23  48/3.58 7/2.79 29.85  1340  333  1673  0.0583 
CARDINAL 954.0  483.28  62.65  545.93  54/3.38 7/3.38 30.38  1339  489  1828  0.0580 
CANVASBACK 954.0  483.26  110.22  593.49  30/4.53 19/2.72 31.70  1342  863  2205  0.0573 
SNOWBIRD 1033.5  523.90  26.91  550.81  42/3.99 7/2.21 30.57  1452  210  1662  0.0540 
ORTOLAN 1033.5  523.35  36.18  559.54  45/3.85 7/2.57 30.78  1450  283  1733  0.0540 
CURLEW 1033.5  523.35  67.84  591.20  54/3.51 7/3.51 31.62  1450  530  1980  0.0537 
BLUEJAY 1113.0  564.19  38.96  603.15  45/4.00 7/2.66 31.96  1563  304  1867  0.0500 
FINCH 1113.0  564.23  71.37  635.61  54/3.65 19/2.19 32.82  1571  559  2129  0.0500 
BUNTING 1192.5  604.33  41.76  646.09  45/4.14 7/2.76 33.08  1674  326  2001  0.0467 
GRACKLE 1192.5  604.21  76.60  680.81  54/3.77 19/2.27 33.98  1682  600  2282  0.0467 
BITTERN 1272.0  644.32  44.57  688.90  45/4.27 7/2.85 34.16  1785  348  2133  0.0437 
PHEASANT 1272.0  644.71  81.66  726.38  54/3.90 19/2.34 35.09  1795  639  2434  0.0437 
DIPPER 1351.0  684.80  47.32  732.12  45/4.40 7/2.93 35.21  1897  370  2267  0.0413 
MARTIN 1351.0  684.80  86.71  771.51  54/4.02 19/2.41 36.16  1907  679  2585  0.0410 
BOBOLINK 1431.0  724.89  50.14  775.04  45/4.53 7/3.02 36.23  2008  392  2400  0.0390 
POLVER 1431.0  725.20  91.90  817.10  54/4.14 19/2.48 37.22  2019  719  2738  0.0390 
NUTHATCH 1510.0  765.28  52.88  818.16  45/4.65 7/3.10 37.22  2120  413  2533  0.0370 
PARROT 1510.0  764.93  96.85  861.79  54/4.25 19/2.55 38.22  2130  758  2888  0.0367 
RATITE 1590.0  805.92  41.45  847.37  42/4.94 7/2.75 37.89  2233  324  2557  0.0350 
LAPWING 1590.0  805.90  55.69  861.60  45/4.78 7/3.18 38.20  2233  435  2668  0.0350 
FALCON 1590.0  805.72  102.14  907.86  54/4.36 19/2.62 39.23  2243  799  3043  0.0350 
CHUKAR 1780.0  902.31  73.37  975.69  84/3.70 19/2.22 40.67  2512  574  3086  0.0313 
MOCKINGBIRD 2034.5  1030.92  44.57  1075.50  72/4.27 7/2.85 34.17  2870  348  3218  0.0277 
ROADRUNNER 2057.0  1042.08  56.79  1098.87  76/4.18 19/1.95 34.83  2901  444  3346  0.0273 
BLUEBIRD 2156.0  1092.35  88.91  1181.26  84/4.07 19/2.44 44.76  3041  696  3737  0.0260 
KIWI 2167.0  1098.22  47.48  1145.70  72/4.41 7/2.94 35.28  3058  371  3428  0.0260 
THRASHER 2312.0  1171.29  63.79  1235.08  76/4.43 19/2.07 36.93  3261  499  3760  0.0243 
JOREE 2515.0  1274.19  69.39  1343.59  76/4.62 19/2.16 38.52  3547  543  4091  0.0223 
HIGH STRENGTH STRANDING
PETREL 101.8  51.57  30.09  81.66  12/2.34 7/2.34 11.70  143  235  378  0.5544 
MINORCA 110.8  56.15  32.76  88.91  12/2.44 7/2.44 12.20  156  256  411  0.5092 
LEGHORN 134.6  68.19  39.78  107.97  12/2.69 7/2.69 13.45  189  311  500  0.4194 
GUINEA 159.0  80.55  46.99  127.54  12/2.92 7/2.92 14.62  223  367  590  0.3550 
DOTTEREL 176.9  89.61  52.27  141.89  12/3.08 7/3.08 15.42  248  408  657  0.3191 
DORKING  190.8  96.68  56.40  153.09  12/3.20 7/3.20 16.01  268  441  708  0.2958 
BRAHMA 203.2  102.97  91.90  194.87  16/2.86 19/2.48 23.86  285  719  1005  0.2777 
COCHIN 211.3  107.03  62.44  169.47  12/3.37 7/3.37 16.85  297  487  784  0.2672 

Till now, TDDL has obtained a series of certifications covering ISO9001 quality management, ISO14001 environmental ,management system
certification, OHSAS18001 occupational health and safety management system, China CCC, PCCC,
CRCC, CE etc.

Henan Tong-Da Cable Co.,LtdHenan Tong-Da Cable Co.,Ltd founded in 1987, covers an area of 360,000 square meters.

The annual production capacity of conductors and power cables is more than 100,000 tons. On March 3, 2011, Tong-Dabecame a public
company listed on the Shenzhen Stock Exchange.

  Our company is specialized in conductors, such as: All Aluminium Conductor (AAC), All Aluminium Alloy Conductor (AAAC),Aluminium
Conductor Steel Reinforced (ACSR), Aluminium Conductor Aluminium Clad Steel Reinforced (ACSR/AW), All Aluminium Alloy Steel Reinfor
ced(AACSR), Aluminium Conductor Aluminium Alloy Reinforced (ACAR), Aluminium Clad SteelStrand (ACS), Galvanized Steel Wire Strand.

Flexible Wire, PVC Insulated Power Cable, XLPE Insulated Power Cable, General Rubber sheathed Flexible Cable, MiningCable, Welding
Cable and Control Cable. These products meet standards of GB, IEC, BS, DIN/VDE, ASTM, JIS, NF, AS/NZS,CSA and so on.

Meanwhile we can produce according to customers’ requirements and specifications. We have obtained certificates ofISO9001,
ISO14001, China’s Electrical Product Safety Certification, State Economic and Trade Commission Recommended
Manufacturer of the Transformation of Urban and Rural Power Grid Construction.

hrough years of unremitting effort and endeavors, we have achieved sound reputation and widely compliments from clientsall over the world
by superior quality, reasonable price and sincere after-sale services.

Q1. Are you a manufacturer?

Yes, we are a manufacturer own factory with almost 30 years experiences.

Q2. What are your main products?

Main products including: ACSR, AAC, AAAC ,ACAR,ACSS,ACSS/TW,ACCC,ACSR/AW,ACS ,GSW, Aerial Bundled Cable
(Low/Medium Voltage),Power Cable,Copper Alloy Wire for Electrical Railway System

Q3. Which countries and regions have your products been exported to ?

Asia, South America, North America, Europe, Africa, Oceania,including: Peru,Colombia, Chile,Korea, America, Philippines,
Vietnam,Singapore, Australia,Dominica,Kenya,Poland,Pakistan,Rwanda,Brazil,Myanmar,Zambia, Congo,Ecuador,Lesotho,
Bolivia,Thailand ,Germany,Angola,Yemen,India,Netherlands,Benin,Maldives,Canada,Honduras,Albania,Burundi,Paraguay ,
Sri Lanka,New Zealand,Bahrain,Costa Rica,Trinidad and Tobago,Guyana, Nicaragua,Mongolia,Haiti,Ghana,Macedonia etc.

Q4. Is the quality of your products guaranteed?

Yes,the quality of our products is highly guaranteed. The products are ISO 9001 ,ISO 14001,OHSAS 18001 certificated. Our
workshops are equipped with advanced production and inspection equipment and the products strictly according to internati
onal standards or customers’ requirements. We do 100% inspection for every batch of semi-finished and finished products.

Q5. What’s the package of products ?

The package is usually wooden drums ,steel drums,steel-wooden drums or according to customers’ requirement.

Q6. How can I get samples?

Please notify the detailed information of sample you need. If we don’t have the exact model, please consider whether the sim
ilar model is OK for you. we provide the free samples for inspection while freight is charged.

Q7. What is our payment terms ?

We can accept the following payment terms: T/T, L/C, O/A

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.

Similar Or Related