0.6/1kv, XLPE (PVC) Insulated Cable, Low Voltage Cable, Cu/XLPE/PVC

0.6/1kv, XLPE (PVC) Insulated Cable, Low Voltage Cable, Cu/XLPE/PVC

0.6/1kv, XLPE (PVC) Insulated Cable, Low Voltage Cable, Cu/XLPE/PVC

YJV

Dingan

CE

Round Wire

XLPE

PVC

Copper

Underground

Stranded

Insulated

DINGAN

China

8544492100

Product Description

Cu/XLPE/PVC, LV Power Cable, 0.6/1 kv (IEC 60502-1)
Application: 
These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.
 
Structure: 
Conductors   
Copper or Aluminium conductor, round standed or Shaped, Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round conductor, Class 1 as per IEC 60228, BS EN 60228 can also be supplied upon request.
Insulation        
PVC Insulation material and thickness shall be as per IEC 60502-1 and BS 6346.
PVC material shall be Type A as per IEC 60502-1 or TI1 as per BS EN 50363.
PVC Insulation material as per SASO 1694 rated for 85°C continuous operation is also available upon special request.
Colour Code  
Colour Code (1) : 
1 Core: Red or Black
2 Cores: Red, Black
3 Cores: Red, Yellow, Blue
4 Cores: Red, Yellow, Blue, Black
5 Cores: Red, Yellow, Blue, Black, Green
Above 5 Cores: Black Cores with White numerals
Colour Code (2) :
1 Core: Brown or Blue
2 Cores: Brown or Blue
3 Cores: Brown, Black, Grey
4 Cores: Blue, Brown, Black, Grey
5 Cores: Green/Yellow, Blue, Brown, Black, Grey
Above 5 Cores: Black Cores with White numerals

Assembly   
Two, Three or Four insulated conductors are laid-up together with non-hygroscopic Inner Sheath fillers and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted.
Armour              
Aluminum/Galvanized Steel Wires applied helically over the bedding as per IEC 60502 or as per BS 5467, BS 6346. Single core cables shall be Aluminium wire armour. Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath
Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9  as BS 6346/5467. Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSF, CPE are available on request. 
Fire Performance of Cable Sheath   
Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply cables with Low Smoke Halogen Free (LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other equivalent standards.
 

Section Conductor Diameter Insulation Thickness Sheath Thickness Overall Diameter Cable Weight
No.xmm² mm mm mm mm Kg/Km
Single Core PVC Insulated Power Cable
1×4 2.6 1 1.4 7.5 95
1×6 3.1 1 1.4 8 120
1×10 4 1 1.4 9 165
1×16 5 1 1.4 10 230
1×25 6.3 1.2 1.4 12 340
1×35 7.4 1.2 1.4 13 450
1×50 8.8 1.4 1.4 14.5 570
1×70 10.6 1.4 1.4 16 800
1×95 12.4 1.6 1.5 18.5 1070
1×120 14 1.6 1.5 20 1300
1×150 15.5 1.8 1.6 22 1600
1×185 17.4 2 1.7 24 1980
1×240 20.3 2.2 1.7 27 2560
1×300 22.7 2.4 1.8 30 3180
1×400 25.4 2.6 1.9 33 4060
1×500 28.8 2.8 2 37 5140
1×630 30.4 2.8 2.2 42 6600
Two Cores PVC Insulated Power Cable
2×1.5 1.6 0.8 1.8 12 205
2×2.5 2 0.8 1.8 13 250
2×4 2.6 1 1.8 15 330
2×6 3.1 1 1.8 16 400
2×10 4 1 1.8 18 525
2×16 5 1 1.8 20 720
2×25 6.3 1.2 1.8 24 1030
2×35 7.4 1.2 1.8 26 1320
2×50 8.8 1.4 1.8 29 1670
2×70 10.6 1.4 1.8 32 2290
2×95 12.4 1.6 1.9 37 3060
2×120 14 1.6 2 40 3700
2×150 15.5 1.8 2.2 44 4500
2×185 17.4 2 2.3 48 5570
2×240 20.3 2.2 2.5 55 7180
Three Cores PVC Insulated Power Cable
3×1.5 1.6 0.8 1.8 13 230
3×2.5 2 0.8 1.8 14 280
3×4 2.6 1 1.8 16 380
3×6 3.1 1 1.8 17 470
3×10 4 1 1.8 19 630
3×16 5 1 1.8 21 880
3×25 6.3 1.2 1.8 25 1280
3×35 7.4 1.2 1.8 27 1660
3×50 8.8 1.4 1.8 30 2110
3×70 10.6 1.4 1.9 35 2980
3×95 12.4 1.6 2 40 3930
3×120 14 1.6 2.1 43 4780
3×150 15.5 1.8 2.3 48 5880
3×185 17.4 2 2.4 52 7230
3×240 20.3 2.2 2.6 59 9390
3×300 22.7 2.4 2.7 65 11620
3×400 25.4 2.6 3 72 14730
3+1 Cores PVC Insulated Power Cable
  3 (mm) 1 (mm) 3 (mm) 1 (mm)      
3x 16/10 5 4 1 1 1.8 22 1000
3x 25/16 6.3 5 1.2 1 1.8 26 1460
3x 35/16 7.4 5 1.2 1 1.8 28 1830
3x 50/25 8.8 6.3 1.4 1.2 1.8 32 2410
3x 70/35 10.6 7.4 1.4 1.2 1.9 36 3360
3x 95/50 12.4 8.8 1.6 1.4 2.1 41 4440
3×120/70 14 10.6 1.6 1.4 2.2 46 5580
3×150/70 15.5 10.6 1.4 1.2 2.3 49 6580
3×185/95 17.4 12.4 1.6 1.4 2.5 54 8200
3×240/120 20.3 14 1.6 1.4 2.6 61 10570
3×300/150 22.7 15.5 1.8 1.6 2.8 67 13020
3×400/185 25.4 17.4 2 1.6 3.1 75 16560
Four Cores PVC Insulated Power Cable
4×1.5 1.6 0.8 1.8 14 265
4×2.5 2 0.8 1.8 15 325
4×4 2.6 1 1.8 17 450
4×6 3.1 1 1.8 18 560
4×10 4 1 1.8 20 770
4×16 5 1 1.8 23 1080
4×25 6.3 1.2 1.8 27 1580
4×35 7.4 1.2 1.8 30 2070
4×50 8.8 1.4 1.8 34 2680
4×70 10.6 1.4 2 38 3760
4×95 12.4 1.6 2.1 44 4960
4×120 14 1.6 2.3 48 6110
4×150 15.5 1.8 2.4 53 7450
4×185 17.4 2 2.6 58 9220
4×240 20.3 2.2 2.8 65 11900
4×300 22.7 2.4 3 72 14730
4×400 25.4 2.6 3.3 81 18830
Multi-Cores PVC Insulated Power Cable
5×1.5 1.6 0.8 1.8 15 300
7×1.5 1.6 0.8 1.8 16 360
10×1.5 1.6 0.8 1.8 19 460
12×1.5 1.6 0.8 1.8 20 510
14×1.5 1.6 0.8 1.8 20 570
19×1.5 1.6 0.8 1.8 22 710
21×1.5 1.6 0.8 1.8 23 770
24×1.5 1.6 0.8 1.8 25 870
30×1.5 1.6 0.8 1.8 26 1020
40×1.5 1.6 0.8 1.8 29 1290
48×1.5 1.6 0.8 1.8 32 1520
61×1.5 1.6 0.8 1.8 35 1900
5×2.5 2 0.8 1.8 16 375
7×2.5 2 0.8 1.8 17 460
10×2.5 2 0.8 1.8 20 590
12×2.5 2 0.8 1.8 21 660
14×2.5 2 0.8 1.8 22 740
19×2.5 2 0.8 1.8 24 940
21×2.5 2 0.8 1.8 25 1030
24×2.5 2 0.8 1.8 27 1150
30×2.5 2 0.8 1.8 29 1370
40×2.5 2 0.8 1.8 32 1810
48×2.5 2 0.8 1.8 36 2130
61×2.5 2 0.8 1.8 39 2630

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.